planeMapper

A wall-mounted ADS-B radar display in a picture-frame form factor. Receives live aircraft positions via RTL-SDR, renders them on an OpenStreetMap base map centred on a home airfield (~100nm radius), and refreshes a 6-colour e-ink display every 60 seconds.

Designed to sit on a desk or hang on a wall — always on, no interaction required, no glare.

Hardware

Item	Notes
Raspberry Pi Zero 2W	Deployment target. Build and test on Pi 5 first.
Nooelec NESDR Smart v5 RTL-SDR dongle	0.5PPM TCXO, SMA input. Needs micro-USB OTG adapter on Zero 2W.
FlightAware 1090MHz ADS-B antenna	Purpose-built for 1090MHz, 5.5dBi
Waveshare 7.3" 6-colour e-ink HAT	E-Ink Spectra 6, 800×480, 40-pin GPIO, SPI

Software Stack

dump1090 — decodes ADS-B from RTL-SDR, serves JSON at http://localhost:8080/data/aircraft.json
Python + Pillow — fetches JSON, renders map image
Waveshare Python library — SPI driver for the e-ink HAT
OpenStreetMap tiles — base map, pre-cached for the local area

Pipeline

RTL-SDR dongle
  → dump1090
    → JSON feed (positions, headings, altitudes, callsigns)
      → Python renderer (Pillow)
        → map image
          → Waveshare SPI driver
            → e-ink display

Refresh loop runs every 60 seconds.

Map Design

Centred on home airfield, ~100nm radius
OpenStreetMap base tiles (pre-cached)
Aircraft plotted as rotated arrows aligned to heading
Short track line behind each aircraft
Callsign and altitude label per aircraft
Colour-coded by altitude band (6 colours match display palette)
Home airfield marked

Colour Bands (altitude)

The Waveshare E-Ink Spectra 6 supports black, white, red, yellow, blue, and green — mapped to altitude bands TBD during development.

Build Order

RTL-SDR + dump1090 — confirm aircraft visible in JSON feed
Base map — render OSM tiles at correct scale, 100nm radius
Aircraft overlay — pull live positions, draw heading arrows and labels
E-ink output — push image via Waveshare library, set 60s refresh loop
Polish — airspace overlays, altitude colour coding, frame and mount

Notes

E-ink only draws power on refresh — very low idle draw, suits always-on use
Pi Zero 2W runs the full stack comfortably given the relaxed 60s refresh cycle
OTG adapter required to connect RTL-SDR dongle to the Zero 2W's single micro-USB port
Lat/lon to pixel coordinate conversion is the trickiest part of the renderer

2.5 KiB Raw Permalink Blame History Unescape Escape