; pictureFrame firmware build environments.
;
; Layout: shared sources at src/ root + panel-specific implementations at
; src/panels/{vendor}/v{N}/. Each panel/version gets its own [env:...] block
; that sets dimensions, pins, and panel-id via build_flags, and selects its
; driver via build_src_filter. New panel = new env block + new
; src/panels/{vendor}/v{N}/ folder + new data/{vendor}-v{N}/ folder. No
; surgery to existing envs.
;
; Old envs preserved as historical snapshots — re-flashing units in the
; field stays a one-line `pio run -e <env> --target upload` command.

; ── Production firmware: Waveshare 7.3" Spectra-6 + ESP32 dev breakout ──
[env:waveshare73-v1]
platform = espressif32
board = esp32dev
framework = arduino
upload_port = /dev/ttyUSB0
monitor_port = /dev/ttyUSB0
monitor_speed = 115200
board_build.filesystem = littlefs
data_dir = data/waveshare73-v1
build_src_filter =
    +<main.cpp>
    +<panels/waveshare73/v1/>
build_flags =
    -DEPD_WIDTH=800
    -DEPD_HEIGHT=480
    -DMAX_PANEL_WIDTH=800
    -DPIN_SCK=18
    -DPIN_MOSI=23
    -DPIN_CS=5
    -DPIN_DC=17
    -DPIN_RST=16
    -DPIN_BUSY=4
    -DPANEL_ID=\"waveshare-7.3-spectra6\"
lib_deps =
    ricmoo/QRCode@^0.0.1

; ── Hardware visual test: flash a single image from data/waveshare73-v1/img.bin ──
; No WiFi, no server.
;   1. pio run -e test-display --target uploadfs   (upload data/)
;   2. pio run -e test-display --target upload      (upload sketch)
[env:test-display]
extends = env:waveshare73-v1
build_src_filter =
    +<test_display.cpp>
    +<panels/waveshare73/v1/>
build_flags =
    ${env:waveshare73-v1.build_flags}
    -DENV_TEST_DISPLAY

; ── Visual hardware tests for the sync-fail / no-WiFi border ──
; Reads the cached /img.bin from LittleFS and draws it with a yellow / red
; border. Sets NVS err_border=1 so the next normal-firmware boot exercises
; the recovery redraw via 304. Flow:
;   1. pio run -e sim-yellow --target upload      (see yellow border)
;   2. pio run -e sim-red    --target upload      (see red border)
;   3. pio run -e waveshare73-v1 --target upload  (back to normal; verifies 304 recovery)
[env:sim-yellow]
extends = env:waveshare73-v1
build_src_filter =
    +<sim_border.cpp>
    +<panels/waveshare73/v1/>
build_flags =
    ${env:waveshare73-v1.build_flags}
    -DSIM_BORDER
    -DSIM_BORDER_COLOR=COLOR_YELLOW

[env:sim-red]
extends = env:waveshare73-v1
build_src_filter =
    +<sim_border.cpp>
    +<panels/waveshare73/v1/>
build_flags =
    ${env:waveshare73-v1.build_flags}
    -DSIM_BORDER
    -DSIM_BORDER_COLOR=COLOR_RED

; ── Native unit tests — no hardware, uses test/mocks/ ──
[env:native-test]
platform = native
lib_deps =
    throwtheswitch/Unity@^2.6
build_flags = -DUNIT_TEST -std=c++17 -iquote test/mocks -iquote test -Itest/mocks -Itest
test_build_src = no