Rename the AP broadcast SSID from PictureFrame-XXXX to WeVisto-XXXX
(operation.h:ap_ssid_from_mac + main.cpp:enter_provisioning). Tests
updated to match.
Setup screens (both panels):
- Top-right header chip replaced with a draw_logo_placeholder() box —
a 'WeVisto' text mark with a 'PLACEHOLDER' subtitle. When the real
brand asset lands, swap the function for a paste of the file at the
same coordinates; no layout change needed.
- Step list rewritten to Matt's spec (4 steps, not 5):
1. Turn on your WeVisto
2. Unlock your phone
3. Scan QR 1 — This will connect your phone to the WeVisto
4. Scan QR 2 — This will open the WeVisto setup page
Step 5 (type WiFi password) lived only in the on-panel guide; the
user does that on the phone via the captive portal, where the
prompt is already explicit.
- Regenerated both panels' setup_bg / ap_bg / ap_bg_retry assets via
the gen_screens scripts.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Flip APP_BASE_URL and the on-screen "go to <domain>/setup/..." text in
the rendered setup_bg images from pictureframe.edholm.me to wevisto.com.
Per the dual-domain migration plan (Option C — server keeps both alive
indefinitely), this only affects newly-flashed units; field devices on
the old URL keep working against the same backend.
Regenerated both panels' setup_bg.bin via gen_screens*.py so the
embedded URL in the on-screen QR overlay text matches the firmware's
runtime poll URL.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When drawNeeded survives a power-loss-mid-draw, send X-Draw-Pending: 1
on the next poll so the server suppresses rotation advancement (incl.
the X-Boot-Reason: cold force-resync) and returns the SAME image back.
Without this, cold-boot rotation defeats the existing 304-with-drawNeeded
recovery branch — the device chases a fresh image every reset and the
13.3 panel ends up showing torn frames as draws keep getting interrupted.
Also enable ARDUINO_USB_CDC_ON_BOOT=1 for the 13.3 env so Serial routes
through the S3's native USB-CDC (visible as the "Espressif USB JTAG
serial debug unit" ACM port when awake). Without this, Serial goes to
UART0, whose pins aren't wired to either USB endpoint on the 13.3E6
board — making firmware logs invisible over USB and forcing reliance
on server-side telemetry alone.
Adds two unit tests covering header-present-when-set and absent-when-clear.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Extract the pre-first-image retry from normal_operation() into a
templated bootstrap_loop() helper in operation.h so the loop body
becomes unit-testable. Add four tests against it: two that verify the
X-Panel-Id header is sent on every poll and matches the compile-time
PANEL_ID (a silent server-side mis-routing risk if dropped), and two
that exercise the loop's exit-on-deep-sleep vs. iterate-while-204
behaviour.
Wire --coverage into env:native-test (compile + link via a post-script)
so `gcovr -r . --filter src/` produces a real number, and ignore the
stray *.gcov files gcovr drops at the repo root.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Three problems surfaced during the first 13.3" end-to-end run:
1) LittleFS IntegerDivideByZero on 200 → write /img.bin. Cause: the
~3.5 MB SPIFFS in default_16MB.csv can't fit three 960 KB setup
screens + a 960 KB cached image (~3.84 MB). Switching to a custom
partitions_13e6.csv with 24 MB LittleFS on the 32 MB flash.
2) Yellow wash across the panel on long SPI bursts. Cause: SPI DMA
from a PSRAM-backed scratch buffer hits a cache-coherency window —
the CPU's writes hadn't reached PSRAM yet when DMA read it. Push
each half in 8 KB chunks through an internal-SRAM (DMA-coherent)
scratch, and drop the bus clock to 4 MHz to match the 7.3"
production speed.
3) Bootstrap window (no image yet) was deep-sleeping for 15 s between
polls — each cycle a ~5 s ROM-boot + Wi-Fi reconnect, so the user
waited ~20 s × N retries between scanning the setup QR and seeing
their first photo land. Now normal_operation_impl returns early
during bootstrap and main.cpp's normal_operation loops with a
2 s delay, keeping Wi-Fi up. Once the first image arrives, the
normal scheduled deep sleep takes over.
Also fixes a related bug Matt called out: a transient TLS hiccup
during bootstrap was hitting the 5xx fallback path and painting a
full yellow fill over the green setup QR, leaving the user with
no claim path. Criterion is now "does /img.bin exist?" (panel has
something worth showing with a border) rather than "is currentImgId
set?", so a fresh device with no cached image preserves the setup
screen through transient network errors.
Diagnostic prints in the panel driver + [op] start/code lines in
normal_operation_impl that proved invaluable during bringup; leaving
them in for now. Tests updated for the new bootstrap semantics
(deep sleep no longer arms on bootstrap-cycle 204/404/5xx); 43/43
native tests pass, 7.3" production build stays byte-identical.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds a second panel target alongside the 7.3":
- src/panels/waveshare13e6/v1/ — full epd.h impl with hardware SPI on
FSPI, dual-CS dispatch (CS_M/CS_S split halves), PSRAM framebuffer
for image/QR/setup-screen render paths
- src/test_display_13e6.cpp + [env:test-display-13e6] — self-contained
first-pixels color-bar smoke test, kept as a hardware diagnostic
- [env:waveshare13e6-v1] — production env: ESP32-S3-WROOM-2 N32R16V
with OPI flash + OPI PSRAM (the WROOM-2 is octal flash; QIO mode
crashes at do_core_init startup.c:328)
- scripts/gen_screens_13e6.py + data/waveshare13e6-v1/ — 1200x1600
portrait setup screens with QR overlay regions matching the driver
- scripts/data_dir.py — extra_scripts shim that routes uploadfs to the
right data/ tree based on $PIOENV (PlatformIO ignores per-env data_dir)
- src/epd.h: epd_setup_pins() abstraction so each panel driver owns its
own pinMode + SPI.begin; main/test_display/sim_border lose all
panel-specific GPIO and call epd_setup_pins() once at boot
- src/operation.h: report PANEL_ID via X-Panel-Id header on every poll
so the server can auto-correct Device.model
7.3" production env stays byte-identical, all 43 native tests pass.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Match the failure path's latency to the happy path. Before: a wrong
password meant the user stared at the yellow Step 1/2 screen for the
full 30 s WIFI_TIMEOUT_MS before the red retry repaint started — total
~50 s to "Connection Failed" visible. After: WL_CONNECT_FAILED and
WL_NO_SSID_AVAIL bail attempt_wifi() immediately, so the red repaint
starts within a few seconds of the radio giving up — total ~25 s,
matching the happy-path-to-Step-2/2 timing.
Also collapse the duplicate boot-time poll loop in main.cpp onto the
shared attempt_wifi() so the same fast-fail covers boot-with-stored-
creds, not just captive-portal submission.
Tests: FW-15a (auth fail) and FW-15b (no SSID) assert millis() never
reaches WIFI_TIMEOUT_MS on those statuses. Existing FW-15 tightened
to use WL_DISCONNECTED so it actually exercises the timeout path.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Two related fixes that together let the post-WiFi-setup window be quiet:
1. operation.h 204/404: skip the panel redraw entirely. The panel already
holds the right thing — setup QR if no image has ever been painted
(img_id == -1), or a real photo if img_id >= 0. Redrawing the QR every
15s during the bootstrap claim window put the e-ink into a perpetual
~20s mid-refresh loop and risked ghosting. Tests updated to assert
no redraw on either sub-case.
2. main.cpp WiFi-fail path: drop the epd_fill(RED) + 3s delay + AP
re-redraw sequence (~43s of e-ink work that destroyed the QR mid-flow)
and replace with a single repaint of a new "Connection Failed — try
again" Step 1/2 screen with red accents. gen_screens.py grows a
gen_ap_retry() variant that recolors yellow → red and swaps the
header/QR labels; the result is shipped as ap_bg_retry.bin alongside
ap_bg.bin in LittleFS. epd.h exposes epd_draw_ap_screen_retry().
Bug: the device only woke from deep sleep on a timer; pressing BOOT
during sleep did nothing. The 5-second-hold reset only worked in the
brief awake window during a poll, which made the documented "hold BOOT
to reset" gesture appear broken to the user. Reported live 2026-05-09.
Fix: arm EXT0 wakeup on PIN_BTN_RESET (active-low — BOOT is pulled-up
on the dev board) at every esp_deep_sleep_start. After the press wakes
the chip, setup() runs and the existing check_reset_button() handles
the rest of the 5-second hold and triggers the NVS clear + reprovision.
Mocks: esp_sleep.h gains gpio_num_t typedef + g_ext0_wakeup_pin/level
globals so the native test can assert the call shape.
Test: FW-RESET-WAKE pins the contract — every deep_sleep_start must
arm EXT0 on PIN_BTN_RESET, level 0.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
A freshly-claimed device on a noon-daily schedule would otherwise sit
dark for up to 24 h after WiFi setup waiting for its first image. The
schedule kicks in only AFTER an image has actually been displayed.
Mechanism: at the bottom of normal_operation_impl, re-read NVS_KEY_IMG_ID
to see whether any successful 200-with-integrity-OK persisted an image
id this cycle (or any prior). If still -1, override sleepMs to
FIRST_IMAGE_POLL_INTERVAL_MS (15 s) — bypassing the schedule and the
clamp range, since SLEEP_CLAMP_MIN_MS is about runaway protection in
steady state and the bootstrap window is naturally bounded by "first
image arrives."
Tests:
- FW-FIRST-IMG-A: 204 with no img_id in NVS → 15s override fires
even when server says 6 hours.
- FW-FIRST-IMG-B: img_id pre-set, 200 cycle → server interval honored
(override doesn't trap the device in 15s forever).
- FW-FIRST-IMG-C: first 200 ever (img_id was -1, now persisted) →
server interval applies starting THIS cycle, no extra 15s nap.
Also patched FW-03 (304 sleep timing) to pre-set img_id so the test
exercises what it claims; 304 in production only happens when the
device already holds the image, so the override would never fire there.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Closes the sell-to-friend gap where a buyer's freshly-reset device
would briefly display the seller's photos before the buyer reached
/setup/{mac} to claim. The firmware had no way to tell the server
"I just got reset" — now it does.
Flow:
- WiFi-setup completion (handle_connect in main.cpp) writes
NVS_KEY_JUST_PROVISIONED=1 alongside the SSID/PASS save.
- Every poll while the flag is set sends X-Just-Provisioned: 1.
- Server (DeviceImageController, paired commit on the webApp side)
responds with 204 + X-Interval-Ms when the binding is stale,
forcing the device to its setup-QR fallback. Once the user
re-claims via /setup/{mac}, the binding is fresh, and the server
answers with X-Claimed: 1 alongside whatever response code applies.
- Firmware clears the NVS flag on seeing X-Claimed: 1 — once
cleared, the device is back to normal long-stable polling.
Tests:
- PROV-A: flag set in NVS → header on the request
- PROV-B: no flag → no header (steady state)
- PROV-C: response with X-Claimed: 1 → flag cleared
- PROV-D: response without X-Claimed → flag stays (so the next
poll keeps signaling "not yet acknowledged")
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Distinguish a cold-boot poll (UNDEFINED wakeup cause = power-on, hard
reset, plug-cycle) from a normal timer wake. Encoded as the
X-Boot-Reason request header; server uses it to deliberately bypass
the schedule and rotate. Matches how users actually use the device:
unplug-and-replug as a manual refresh.
Tests: two new native cases asserting the header is "cold" on
UNDEFINED wakeup and "timer" on TIMER wakeup. esp_sleep mock now
exposes a settable wakeup_cause global.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The dev-only cap that forced every-1-min polling regardless of the app's
schedule is removed. The device now sleeps for whatever X-Interval-Ms
the server hands back (driven by rotationIntervalMinutes / wakeTimes),
clamped to [30s, 25h] as a safety net against malformed values.
Renamed FETCH_INTERVAL_MS to FETCH_INTERVAL_MS_FALLBACK — it's now
*only* used when the header is absent (rare; rolling deploy / hand-
crafted response). Added SLEEP_CLAMP_MIN/MAX for the bounds.
Tests FW-09 and FW-10 flipped to lock the new behavior; added FW-10b
covering sub-MIN clamping (battery protection if server sends 1000ms).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Three cross-referenced markers — config.h, operation.h, and FW-10 in the
test file — calling out that the FETCH_INTERVAL_MS cap is intentionally
holding the polling rate at 1 minute for dev iteration. Once the firmware
is stable and we want the device to honor the app's per-frame
rotationIntervalMinutes / wakeHour settings, the cap in operation.h
becomes a sanity-clamp (e.g., 30 s ≤ sleep ≤ 25 h) and the no-header
fallback splits into its own constant.
Behavior unchanged — comments only.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Pairs with the server-side header. After streaming the response body to
LittleFS, hash the file with mbedtls/sha256 (hardware-accelerated on
ESP32-S3) and compare against the server's claim. On mismatch:
- Don't update NVS_KEY_IMG_ID, so the next poll reports the old id and
the server sends 200 again with fresh bytes (natural retry, no extra
HTTP round-trip in this cycle).
- Don't draw — panel keeps whatever was up before, no garbage on the
e-ink.
- Raise NVS_KEY_ERR_BORDER so the next healthy 304 paints a clean
recovery frame with the sync-fail border.
Verification is skipped when the header is absent, so the firmware
stays compatible with any server that hasn't deployed the matching
header yet. mbedtls compiles into a native-test no-op stub (returns
empty hex), so existing native tests don't need a SHA implementation.
Two new tests: FW-17a (mismatch path) and FW-17b (missing header
backward compat). Mock String now has equalsIgnoreCase so the new
comparison compiles in native-test.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Without this, devices upgrading from the old buggy fill-on-error firmware
get stuck on yellow forever: the new code reads NVS_KEY_ERR_BORDER == 0
(default — the old firmware never wrote that key), so the next 304 sees
no err flag and skips the redraw. NVS img_id matches what the server is
serving, so server says "you're current" indefinitely.
Add NVS_KEY_SCHEMA_V. On boot, if stored version is below
NVS_SCHEMA_VERSION (currently 1), treat errBorder as set for this cycle
and bump schema_v. The next 304 then redraws from LittleFS (the cached
.bin survives flashing) and clears the flag.
Tests: FW-06f locks in the upgrade path (schema_v missing → redraw on
304). FW-06g asserts the migration is one-shot (post-bump → no redraw
on steady-state 304). FW-06d updated to set schema_v explicitly so it
represents the post-migration steady state.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Previously a 5xx / timeout / malformed response fired epd_fill(COLOR_YELLOW),
which writes the yellow nibble across the entire 800×480 framebuffer and
destroys the last good image — exactly what FR38 forbids ("Last image
persists ... yellow border signals state"). The device then got stuck on a
blank yellow screen because the next 304 didn't redraw.
Changes:
- New epd_draw_image_with_border streams the cached .bin row-by-row,
overwrites border-region pixels in the row buffer, and pushes a single
composited framebuffer (same pattern as the existing setup-QR overlay).
- normal_operation_impl else-branch now redraws the cached image with a
yellow border, falling back to epd_fill only when no cache exists
(first-boot error). Sets a new NVS_KEY_ERR_BORDER flag.
- 200 and 304 paths clear NVS_KEY_ERR_BORDER. The 304 branch now
triggers a clean repaint when the err flag is set, so the device
recovers from the stuck-yellow state on the next healthy poll
without waiting for rotation to advance.
- LittleFS read mock now returns invalid File when the file doesn't
exist (matches real LittleFS), so the no-cache fallback path is
actually exercisable in tests.
Tests:
- Replaces the old test_fw06_error_fills_yellow (which locked in the
buggy fill behavior) with FW-06a..e covering: error+cache draws
border (no fill), error+no-cache falls back to fill, 304 after
error repaints clean, steady-state 304 touches nothing (the
regression the user flagged), 200 after error clears the flag.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Three bugs fixed:
- NVS img_id now written before epd_init/draw; new draw_needed flag in NVS
survives power-loss mid-refresh so next boot re-draws from LittleFS instead
of showing stale content
- epd_sleep() now only called when display was initialized this cycle,
preventing a 60 s wait_busy() timeout on every 304 poll
- esp_task_wdt_reset() added to wait_busy() loop so the ~20 s 6-color
refresh no longer triggers the task watchdog
Also extracts normal_operation into operation.h template and adds
a native PlatformIO test suite (16 tests) covering the full response matrix.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
football2801